Applying a Prescribed Displacement
In the Fixture PropertyManager, select one of the following: Use Reference Geometry...column cell at a particular time step, the selected dofs are considered fixed
Simulation > Loads and Restraints > Fixtures
Mating Fittings in Routing Subassemblies
. If the fitting is fixed or mated, it always drives the sketch, and its status cannot be changed. ...
Routing > Manage Routing Assemblies
Assembly Sequence PropertyManager
. The base part selection is fixed and sets the origin of measurement for the evaluation. Example: ...
TolAnalyst > Creating a TolAnalyst Study > Creating the Assembly Sequence
Inserting Several Components at the Same Location
In the FeatureManager design tree, (f) beside each component indicates that the component locations are fixed...If the assembly was empty, then the first component is fixed and the
Assemblies > Basic Component Operations > Adding Components to an Assembly > Inserting Components from the PropertyManager
The FeatureManager Design Tree in an Assembly
. The prefixes are: Under defined Over defined Fixed Not solved The absence of a prefix indicates ...
Assemblies
Yaw, Pitch, and Roll in Results
..., pitch, and roll define one such space-fixed rotation sequence. There are multiple ways to define ...
Motion Studies > Motion Study Plots > Orientation, Reflected Load, and Other Plots
Edit Scene PropertyManager - Advanced
... Edit Scene. Click the Advanced tab. Fixed aspect ratio Scales the floor uniformly as you change ...
Model Display > Scenes
Slope PropertyManager
The start point must be a fixed point that the pipe segment can use to rotate and create the slope.
Routing > Pipes and Tubes Routes > Slopes
Convert to Sheet Metal Tool
In the Convert to Sheet Metal PropertyManager, you specify the fixed face and thickness of the sheet metal part, the default bend radius, and the
Sheet Metal > Comparing Sheet Metal Design Methods
Fixtures
The Fixture PropertyManager allows you to prescribe zero or non-zero displacements on vertices, edges, or faces for use with static, frequency...
Simulation > Loads and Restraints
Fixtures and Loads
Fixtures and loads define the environment of the model...Loads and fixtures are fully associative and automatically adjust to changes in geometry...You can organize fixtures, loads, and connectors into folders
Simulation > SOLIDWORKS Simulation Fundamentals
Design Table Configurations
You can control the following parameters in an assembly design table: components – suppression state, referenced configuration, fixed or floating
Configurations
Document Properties - Weld Symbols
... to apply these layer settings. Fixed size weld symbols Clear to scale the size of the symbol to ...
SOLIDWORKS Fundamentals > Overview of SOLIDWORKS Options > Document Properties > Document Properties - Annotations
Swept Flanges for Conical and Cylindrical Bodies
... that propagates to the flat pattern as a fixed entity. The Cylindrical/Conical Bodies option is ...
Sheet Metal > Using Sheet Metal Tools > Swept Flange
Creating Opposite-Hand Versions of Sheet Metal Parts
information from the original part to the mirrored part, such as fixed face, grain direction, bend lines, and bounding box
Sheet Metal > Sheet Metal Parts > Mirroring Sheet Metal Parts
Document Properties - Sheet Metal
Show fixed face...Displays the fixed face that is defined in the flat pattern feature of the sheet metal part...To view the fixed face, the flat pattern view must
Sheet Metal > Sheet Metal Parts
SOLIDWORKS Fundamentals > Overview of SOLIDWORKS Options > Document Properties
SOLIDWORKS to DXF/DWG Mapping
... and Line Style from the lists. Layers and DEFPOINTS are fixed layers. You cannot edit or delete ...
Import and Export > DXF/DWG Import Wizard
Sketched Bend PropertyManager
. In the graphics area, select a face that does not move as a result of the bend for Fixed Face ...
Sheet Metal > Using Sheet Metal Tools > Sketched Bends
Sheet Metal PropertyManagers
..., bend radius, bend allowance, auto relief ratio, and fixed entity) for the entire part. Flatten-...
Sheet Metal > Using Sheet Metal Tools
Repair Sketch
If you have updated the sketch, click Refresh to verify that you have fixed previous errors or to find new errors
Sketching > Sketch Tools
Import and Export > 2D to 3D Conversion > Additional Conversion Tools
Example: Conflicting Mates
... the mate. The components can be fixed or mated to other components. The bottom faces of these two ...
Assemblies > Mates > Solving Mate Problems > Mate Error Examples
Mates in Multibody Parts
... selected bodies move as a single entity. The bodies that are not selected are treated as fixed.
Parts and Features > Multibody Parts
Equal Curve Length Parametric Relations
... . You can create a fixed spline when you select a spline and any other sketch entity. You can ...
Sketching > Dimensions and Relations > Relations