Defining the Sketch Origin and Orientation on .DWG or .DXF Import
When importing a .dwg or .dxf file as a 2D sketch for a part, you can define the model origin and orientation.
- Open a .dwg file.
- In the DXF/DWG Import wizard, select Import to a new part as and 2D sketch.
- Click Next.
- Select part document options and click Next.
- Click Define Sketch Origin and click a point in the sketch preview to define the origin.
- Adjust the origin values and click Apply.
- To change the model orientation about the origin, select Rotate about the origin and enter the angle of rotation.
- Select other options and click Finish.