Hide Table of Contents

Export to AEC - Step 3: To Remove

Use the Step 3: To Remove screen of the Export to AEC Wizard to specify features to remove that were not automatically removed.

To display the Step 3: To Remove screen of the Export to AEC wizard:

  1. Click Tools > Export to AEC.
  2. Complete the Type and Orientation screen and click .
  3. On the Specify Export Details screen, for Set Target Model Details, select Custom and click .
  4. Complete Step 1: Components and Step 2: To Keep, clicking to advance to the next wizard screen.

Items to Remove

select_face_planar.png Items to Remove Lists items to be removed from the model. In the graphics area or FeatureManager design tree, select items to be removed. Items you can select include:
  • Subassemblies
  • Parts
  • Features, including assembly features and suppressed features
  • Reference geometry
  • Routing points
  • Sketches

Section View

Lets you see and select internal components.

  Reference Section Plane/Face Specifies the plane or face to use to section the model. Select a plane or face, or click Front , Top , or Right to create the section view. Reverse Section Direction changes the direction of the cut.
Offset Distance Offsets the section from the reference plane by a specified distance.
X Rotation Rotates the section plane along the X-axis.
Y Rotation Rotates the section plane along the Y-axis.


Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Export to AEC - Step 3: To Remove
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:



x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2015 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.