Specify properties for Bills of Materials.
To open the Bill of Materials PropertyManager, do one of the following:
- Click Bill of Materials on the Table toolbar, or with a document open, click .
- Click the pan icon in the upper left corner of an existing bill of materials.
BOM Options
Create new table |
Creates a new drawing table. |
Copy existing table |
Copies a BOM saved from a referenced assembly or part. Select a BOM from the list. Select Linked to link the data in the drawing BOM to the assembly BOM. You can unlink the BOMs but you cannot re-link them. Changes made in either BOM are reflected in the other. Formatting is not linked.
|
Table Template
|
Open table template for Bill of Materials |
Choose a standard or custom template. This option is available only during table insertion.
The BOM columns match those of the template you select.
The BOM columns match those of the template you select.
|
Table Position
The stationary corner controls the direction in which the table expands when adding new columns or rows.
The Stationary corner option is not available when you first create the table. If the table is anchored on creation, the stationary corner is automatically selected on the drawing sheet in the quadrant nearest the table anchor.
Stationary corner |
Top Left
|
New columns extend to the right and new rows extend below the anchor point.
|
Top Right
|
New columns extend to the left and new rows extend below the anchor point.
|
Bottom Left
|
New columns extend to the right and new rows extend above the anchor point.
|
Bottom Right
|
New columns extend to the left and new rows extend above the anchor point.
|
|
Attach to anchor point |
Attaches the specified corner to the table anchor.
|
BOM Type
Top-level only |
List parts and subassemblies, but not subassembly components.
|
Parts only |
Does not list subassemblies. Lists subassembly components as individual items.
|
Indented |
Lists subassemblies. Indents subassembly components below their subassemblies. Select:
- No numbering
- Detailed numbering
- Flat numbering
|
- When creating a BOM for a document that includes weldment parts, select Detailed cut list to display detailed cut information.
- If you change the BOM Type of an existing BOM, the document file size increases and may slow performance. It is recommended that you delete the original BOM, then insert a new BOM with the desired BOM Type.
- You can dissolve subassemblies in a bill of materials.
BOM Scaling
Lets you scale the BOM size. Available only after you click the pan icon in the upper left corner of an existing bill of materials in a part or assembly.
Configurations
Lists quantities in the Bill of Materials for all selected configurations. Select configurations manually, or click Select all configurations or Unselect all configurations .
Part Configuration Grouping
Specifies how parts with multiple assembly configurations are listed in the BOM.
Display as one item number |
Uses the same item number for different configurations of a component in different top-level assembly configurations. Each unique component configuration can be present in only one of the assembly configurations in the BOM. This option applies when you first create a BOM. If you toggle it after the BOM is created, there is no change. When you use this option, set BOM Type to Top-level only.
For example, one configuration of an assembly has the following components:
- part1 (config_A)
- part1 (config_A)
- part1 (config_A)
and another configuration of the same assembly has different configurations of the same component:
- part1 (config_B)
- part1 (config_B)
- part1 (config_B)
A Top-level only BOM that references both assembly configurations with Display as one item number selected appears as:
ITEM NO.
|
PART NUMBER
|
config_A / QTY.
|
config_B / QTY.
|
1 |
part1 (config_A)
|
3 |
- |
1 |
part1 (config_B)
|
- |
3 |
To see the configuration name in the PART NUMBER column, go to the part document. On the ConfigurationManager tab, right-click each configuration, and select Properties. Under Part number displayed when used in a bill of materials, select Configuration Name. Alternatively, right-click a component in the BOM's assembly structure column and click Component Options. Under Part Number, select Configuration Name, then click .
|
Display configurations of the same part as separate items |
If a component has multiple configurations, each configuration is listed in the BOM.
|
Display all configurations of the same part as one item |
If a component has multiple configurations, the component is listed in only one row in the BOM.
|
Display configurations with the same name as one item |
If more than one component has the same configuration name, they are listed in one row of the BOM. For this option to work properly, Part number displayed when used in a bill of materials in the part must be set to either:
- The same User Specified Name
- Configuration Name (if different components in the assembly have the same configuration names)
For example, an assembly has the following components:
- part1 (config_A)
- part1 (config_A)
- part2 (config_A)
When you select Display configurations with the same name as one item, the BOM appears as:
ITEM NO.
|
PART NUMBER
|
QTY.
|
1 |
part1
|
3 |
|
Keep Missing Item
Controls how to handle replaced components in BOM table.
Strikeout |
Select Strikeout to display text for the missing item with strikeout formatting. |
Replaced components |
- Keep both with new item number for replacement
- Keep both with same item number
- Keep item number and do not keep replaced component
Replaced components lets you define how replaced components are handled in the BOM regardless of the Do not change item numbers
setting in Item Numbers.
|
Item Numbers
|
Start at
|
Enter starting item number.
|
|
Increment
|
|
|
Follow assembly order
|
Select Follow assembly order
to order the BOM item numbers the same as the assembly. When selected, you can select Follow sub-assembly order to order the BOM item numbers the same as the subassembly. |
|
Do not change item numbers
|
Select to prevent BOM item numbers from updating when you change item numbers elsewhere.
|
Layer
|
Layer |
In drawings with named layers, select a layer. The table assumes the layer color.
|