On a per-document basis, use the Weldments Document Properties page to specify how the weldment software creates cutlists and configurations.
To open the Weldments Document Properties page, click .
| Automatically create cut lists |
Enables the Create Cut Lists Automatically setting on the cut list shortcut menu. This setting automatically groups similar bodies together within one cut list folder.
|
| Automatically update cut lists (may affect performance with many bodies) |
Enables the Update Automatically setting on the cut list shortcut menu. This setting updates the model's custom properties and internal supporting data when you make geometry changes or edits to weldments.
|
| Create derived configurations |
Creates the derived configuration Default[As Welded] when you create a structural member in a part. |
| Assign configuration Description strings |
Only available when Create derived configurations is enabled. Adds the As Welded and As Machined configuration descriptions when you insert a weldment feature into a new part.
|
| Rename cut list folders with Description property value |
Enables the option to rename cut list folders with the Description property value. The behavior of this option is as follows:
- When you create new parts in SOLIDWORKS 2015 or later using blank templates, the option is enabled.
- When you create new parts in SOLIDWORKS 2015 or later with existing/saved templates that were created using SOLIDWORKS 2015, the option is read from the templates you use.
- When you create new parts with existing/saved templates that were created in versions before SOLIDWORKS 2015, the option is disabled.
- For files created with a version of SOLIDWORKS that is older than 2015, the option is disabled. You must manually enable it for these files.
|