Hide Table of Contents

Inserting Blocks

Insert blocks, adding additional instances of existing blocks, or browse to and insert previously saved blocks.

To insert a block:

  1. In the Edit Sketch mode, click Insert Block Tool_Insert_Block_Block.gif (Blocks toolbar) or Tools > Blocks > Insert.
  2. In the PropertyManager, under Blocks to Insert, you can either:
    • Select an item from Open Blocks to insert an additional instance of a current block.
    • Click Browse to locate a previously saved block.
    If the block is in current sketch, do this: If the block was previously saved, do this:
    1. Drag the block and click to position in the graphics area.
    2. Do one of the following:
      • Repeat step a to add another incidence.
      • Select another item from Open Blocks.
    1. In the dialog box, select the block and click Open.
      If you select Create external reference to file, changes made to the original file propagate to all instances of the block. You cannot edit the block in the current document.
    2. Drag the block and click to position.
      In the PropertyManager, under Blocks to Insert, you can select Link to file. The result is identical to selecting Create external reference to file in the dialog box.
  3. Add any relations required to ensure that movement is correctly constrained.
  4. In the PropertyManager, under Parameters, set values for:
    • Block Scale scale_entities.png. The default value 1 is the size of the original block.
    • Block Rotation PM_angle.gif. The default value 0 is the angle at which the original block was created.
  5. Click PM_OK.gif.


Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Inserting Blocks
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:



x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2016 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.