Expand IntroductionIntroduction
Expand NouveautésNouveautés
Expand AdministrationAdministration
Expand Interface utilisateurInterface utilisateur
Expand Fonctions de base de SolidWorksFonctions de base de SolidWorks
Expand Migrer de la 2D à la 3DMigrer de la 2D à la 3D
Expand AssemblagesAssemblages
Expand CircuitWorksCircuitWorks
Expand ConfigurationsConfigurations
Expand Design CheckerDesign Checker
Expand Etudes de conception dans SolidWorksEtudes de conception dans SolidWorks
Expand Habillage et mises en planHabillage et mises en plan
Expand DFMXpressDFMXpress
Expand DriveWorksXpressDriveWorksXpress
Expand FloXpressFloXpress
Collapse Import/ExportImport/Export
Expand Conception de moulesConception de moules
Expand Etudes de mouvementEtudes de mouvement
Expand Pièces et fonctionsPièces et fonctions
Expand PhotoView 360PhotoView 360
Expand PhotoWorksPhotoWorks
Expand RoutageRoutage
Expand TôlerieTôlerie
Expand SimulationSimulation
Expand SimulationXpressSimulationXpress
Expand EsquisseEsquisse
Expand Produits SustainabilityProduits Sustainability
Expand SolidWorks UtilitiesSolidWorks Utilities
Expand TolérancementTolérancement
Expand ToolboxToolbox
Expand Constructions soudéesConstructions soudées
Expand Workgroup PDMWorkgroup PDM
Expand DépannageDépannage
Expand GlossaireGlossaire
Masquer le sommaire

Automatic Surface Creation PropertyManager

Automatically create solids based on the desired amount of detail. Whenever possible, the result is a solid. If the surfaces cannot be knitted together, the result is a surface.

Mesh

Surface created from mesh

Surfaces created by ScanTo3D are composed of patches (ideally four-sided). Groups of patches form regions on the surfaces. Feature lines form the boundaries between regions.

Feature lines = orange

Patch boundaries = black

Ends of feature lines = red circles

Ideally, feature lines are located where the mesh curvature transitions between a contact through tangent relationship. For example, at a filleted edge separating two sides of a cube.

You can edit feature lines in the Automatic Surface Creation PropertyManager to extract more desirable surfaces. You can create and delete lines plus move lines and vertices.

To automatically create solids:

  1. Move the slider to set the amount of Surface Detail.

Moving the slider left makes bigger patches, increases generation speed, but creates surfaces with less detail. Moving the slider right makes smaller patches, decreases generation speed, but creates surfaces with greater detail and accuracy.

  1. Click Update Preview.

ScanTo3D creates surfaces from the mesh. The graphics area updates and the PropertyManager reports the Number of surfaces.

  1. To modify the number of surfaces, re-position the slider, then click Update Preview. Repeat as necessary to achieve the desired results.

  2. To edit feature lines, select Edit feature lines and use the editing tools.

    • Edit feature lines. Displays feature lines and enables these editing tools:

  • Add Feature Lines . Red points and a green circle indicate valid start and end points for new feature lines.

A new feature line cannot intersect an existing feature line.

  • Delete Feature Lines .

  • Move Feature Lines By Ends . Move the pointer over a vertex, then drag to re-position the vertex and feature lines.

  • Relax Feature Lines . Creates a smoother boundary between regions. Relaxing feature lines the first time does not always generate visible results. Relaxing a feature multiple times usually produces visible changes.

    • Show patch boundaries. Toggles the display of patch boundaries only.

  1. Click .

ScanTo3D creates surfaces, then knits them together to form a solid model.

Self-Intersected Surfaces

The message box reports the Number of self-intersected surfaces, which are listed under Surface Errors. The self-intersected surfaces are shown in red.

To fix self-intersected surfaces:

  1. In the PropertyManager, select Edit feature lines.

  2. Use the edit feature lines tools to modify feature lines.

  3. Click Update Preview to check progress.

The Surface Errors box updates.

If your part is complex with a large number of surfaces, Update Preview takes time to regenerate the model. To save time, skip steps 2 and 3 (editing feature lines) and follow steps 4 through 6.

  1. If you cannot fix all the surface errors, click .

A message prompt asks if you want to delete the surfaces with errors.

  1. Click OK.

  2. Use the SolidWorks surfacing tools to fill the surfaces areas you deleted.

Related Topics

ScanTo3D Overview



Faire un commentaire sur cette rubrique

Tous les commentaires concernant la présentation, l'exactitude et l'exhaustivité de la documentation sont les bienvenus. Utilisez le formulaire ci-dessous pour faire parvenir vos commentaires et suggestions directement à notre équipe de documentation. Celle-ci ne peut pas répondre aux questions de support technique. Cliquez ici pour des informations sur le support technique.

* Requis

 
*Courriel:  
Sujet:   Commentaires sur les rubriques d'aide
Page:   Automatic Surface Creation PropertyManager
*Commentaire:  
*   Je reconnais avoir pris connaissance et accepter par la présente la politique de confidentialité en vertu de laquelle mes données personnelles seront utilisées par Dassault Systèmes

Rubrique d'impression

Sélectionner l'étendue du contenu à imprimer :

x

La version du navigateur que vous utilisez est antérieure à Internet Explorer 7. Afin d'optimiser l'affichage, nous suggérons d'utiliser Internet Explorer 7 ou une version ultérieure.

 Ne plus afficher ce message
x

Version du contenu de l'aide sur le Web: SOLIDWORKS 2010 SP05

Pour désactiver l'aide sur le Web dans SOLIDWORKS et utiliser l'aide locale à la place, cliquez sur ? > Utiliser l'aide sur le Web de SOLIDWORKS.

Pour signaler tout problème rencontré avec l'interface ou la fonctionnalité de recherche de l'aide sur le Web, contactez votre support technique local. Pour faire part de vos commentaires sur des rubriques d'aide individuelles, utilisez le lien “Commentaires sur cette rubrique” sur la page de la rubrique concernée.