Hide Table of Contents

Lighting PropertyManager

You can modify the intensity, color, position, and direction of lights. The light properties that are available depend on the type of light source and whether PhotoView 360 is added in.

To display this PropertyManager, in the DisplayManager, click View Scenes, Lights and Cameras . Right-click Lights and select Edit All Lights.

  • Edit Scene PropertyManager - Illumination
    The Edit Scene PropertyManager - Illumination tab sets lighting properties for a scene.
  • Ambient Light PropertyManager
    Ambient light illuminates the model evenly from all directions in SolidWorks only. You can modify the intensity and color of ambient light. You can turn the Ambient light on or off, but you cannot delete it or add additional Ambient lights.
  • Directional Light PropertyManager
    Directional light comes from a source that is infinitely far away from the model. It is a columned light source consisting of parallel rays from a single direction. You can modify the intensity, color, and position of the light source.
  • Point Light PropertyManager
    A point light comes from a very small light source located at a specific coordinate in the model space. This type of light source emits light in all directions. You can modify the intensity, color, and position of the light source.
  • Spot Light PropertyManager
    A spot light comes from a restricted, focused light with a cone-shaped beam that is brightest at its center. A Spot light can be aimed at a specific area of the model. You can modify the intensity, color, and position of the light source, and you can adjust the angle through which the beam spreads.
Parent topic: Lights


Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Lighting PropertyManager
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:
x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2011 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.52