For most sections in a report, you can add comments in the Section properties Comments box. For some sections, you can set additional options as listed below. Many of these options are self-explanatory and are listed here only for completeness.
Description
|
User-defined comments
|
Assumptions
|
User-defined comments
|
Model Information
|
- Names of all referenced components and subassemblies
- Configuration name used in study
- Path to all documents listed
- Revision or last modified date
- Physical properties of each body
- Ply information for composites
|
Study Properties
|
- Solution information including study name, analysis type, and mesh type
- Solver information including solver used in the study
- Solver options including properties of the selected study
- Result folder
|
Units
|
Unit system for:
- Length/Displacement
- Temperature
- Angular velocity
- Stress/Pressure
|
Design Study Setup
|
|
Material Properties
|
- Material details such as name, yield strength, tensile strength
- Values and graph of the material table
- Descriptive information for custom-defined materials
- Custom material properties defined by the user for the custom-defined materials.
|
Thermal Loads
|
Thermal load names, images, and details
|
Loads & Fixtures
|
- Fixture names, images, details, and resultant forces
- Load names, images, and details
- Values and graphs of the loading for transient analysis
|
Connector Definitions
|
- Types of connectors and details
- Connector forces
|
Contact
|
Types of contacts, images, and properties
|
Mesh Information
|
- Mesh details and image
- Mesh control information (name, image, and details)
|
Sensor Results
|
Sensor names, locations, and details
|
Resultant Forces
|
- Reaction forces
- Reaction moments
|
Beams
|
Select to include beam stresses or forces at:
- Joints
- Ends
- Extreme values
- Entire length
|
Study Results
|
Includes images of all the plots in the Results folder. Clear to manually add the desired images using insert image.
|
Conclusion
|
|
Appendix
|
Includes an Appendix with external data, either embedded or linked. See user defined section.
|