Hide Table of Contents

Edit Scene PropertyManager - Illumination

The Edit Scene PropertyManager - Illumination tab sets lighting properties for a scene.

To display this tab:

Add in PhotoView 360. In the DisplayManager, click View Scenes, Lights and Cameras. Right-click Scene and select Edit Scene. Click the Illumination tab.

PhotoView Illumination

Background brightness Sets brightness of background in PhotoView only. Has no effect when Background on the Basic tab is None or the color white.
Rendering brightness Sets brightness contributed by the HDRI (high dynamic range imaging) environment in the rendering.
Accurate environment lighting Turns on or off the use of accurate environment lighting calculations from the HDRI scene environment in the rendering.
Scene reflectivity Sets the amount of reflectivity provided by the HDRI environment.

Examples: Background brightness

scene_background_brightness_0.5.png scene_background_brightness_1.png
Background brightness = 1 Background brightness = 2

Examples: Rendering brightness

scene_rendering_brightness_1.png scene_rendering_brightness_2.png
Rendering brightness = 1 Rendering brightness = 2

Examples: Accurate environment lighting

scene_accurate_env_lighting_off.png scene_accurate_env_lighting_on.png
Accurate environment lighting = off Accurate environment lighting = on

Examples: Scene reflectivity

scene_scene_reflectivity_1.png scene_scene_reflectivity_2.png
Scene reflectivity = 1 Scene reflectivity = 2

Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

Subject:   Feedback on Help Topics
Page:   Edit Scene PropertyManager - Illumination
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:


We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again

Web Help Content Version: SOLIDWORKS 2014 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.