Hide Table of Contents

Equation Driven Curve PropertyManager

The Equation Driven Curve tool lets you create a curve by defining the equation for that curve.

To open this PropertyManager:

Select an existing equation driven curve or create a new one (for example, by clicking Equation Driven Curve tool (Sketch toolbar) or Tools > Sketch Entities > Equation Driven Curve).

When you create equation driven curves, the values you use must be in radians.

You cannot use global variables directly for equation driven curves. However, you can create a global variable and associate it with a dimension, then use the dimension in the equation for the curve.

Existing Relations

If you select an existing curve:
Displays relations inferenced automatically during sketching or created manually with Add Relations.

When you select a relation in the list, a callout is highlighted in the graphics.

PM_information.gif Displays the status of the selected sketch entity (Fully Defined, Under Defined, and so on).

Add Relations

If you select an existing curve, you can add relations to the selected entity. The list includes only relations that are possible for the selected entity.


If you select an existing curve, click For construction to convert the entity to construction geometry.

Equation Type

Explicit Lets you define X values for the start and endpoints of the range. Y values are calculated along the range of X values.
Parametric Lets you define T values for the start and endpoints of the range. You can define an equation for X values and another equation for Y values. Both equations are solved along the range of T values.

Only parametric curves are available in 3D sketches.


You can specify any appropriate combination of the following parameters to define the curve if the curve is not constrained by relations.
(explicit equations) Define the curve equation, where Y is a function of X. Or, define the curve equation, where X, Y, and Z are functions of T. Z is for 3D sketches only.

If you type an equation that cannot be solved or has incorrect syntax, the equation appears in red.

You can use any functions supported in the Equations dialog box. For example, you can build complex equations like this:
2*(x + 3*sin(x))

You can also use feature dimensions in equations. For example:

, , and (parametric equations)
and (explicit equations) Specify the range of values for 1, where 1 is the starting point and 2 is the ending point (for example, X1 = 0 and X2 = 2*pi).
Click to lock or unlock the start or end point location on the curve:
  • (locked): The starting or ending point is fixed.
  • lock.png Button (unlocked): You can drag the starting or ending point along the curve.
and (parametric equations)

Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

Subject:   Feedback on Help Topics
Page:   Equation Driven Curve PropertyManager
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:


We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again

Web Help Content Version: SOLIDWORKS 2014 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.