隱藏目錄

Creating Revision Numbers

You can create revision numbers to match the numbering schemes used in your company. You can then associate the revision numbers with workflow states and transitions, or allow users to assign revision numbers manually.

To create a revision number:

  1. Create one or more revision number components to serve as counters that increase each time a revision number is set for a file.
    1. Expand Revisions, then right-click Revision number components and select New component.
    2. In the Revision Number Component Properties dialog box, type a descriptive Component name that reflects how your company organizes its data.

      Enterprise PDM provides a sample revision component named Alpha Revision Component. If your company prefers a numeric designator for revisions, you could specify Numeric Revision Component as the component name.

    3. For Initial counter value, specify the value to be used for the component the first time it is applied to a file.
    4. Under Data, select the method the Enterprise PDM software uses to create the revision component:

      • Format string bases the component on predefined counters that you select from a list.
      • Value from list bases the component on a list of values that you specify.

    5. Click OK.
  2. Expand Revisions, then right-click Revision numbers and select New revision number.
  3. In the Revision Number Properties dialog box, type a name for the revision number.

    You use this name when you assign a revision number to a workflow state.

  4. For Revision number format string, select one or more of the revision number components you defined in step 1.
  5. Click OK.


提供對此主題的意見反應

SOLIDWORKS 歡迎您提供有關於文件呈現方式、正確性、及完整性的意見反應。請使用下方的表格直接將您對此主題的意見與建議傳送給我們的文件團隊。文件團隊並無法回答關於技術支援的問題。按一下此處來獲得關於技術支援的資訊

* 必要的

 
*電子郵件:  
主旨:   說明主題的意見反應
頁面:   Creating Revision Numbers
*意見:  
*   我承認已閱讀且僅此接受隱私權政策,Dassault Systèmes 將遵循此政策之規定使用我的個人資料

列印主題

選擇要列印的內容範圍:

x

偵測到您使用的瀏覽器版本是舊於 Internet Explorer 7。要獲得最佳的顯示,建議您升級瀏覽器到 Internet Explorer 7 或更新的版本。

 不要再次顯示此訊息
x

Web 式說明內容版本:SOLIDWORKS PDM 2014 SP05

要從 SOLIDWORKS 中停用 Web 式的說明並改用本機說明,請按一下說明 > 使用 SOLIDWORKS Web 式說明

要報告在 Web 式說明介面及搜尋中遇到的問題,請聯絡您當地的技術支援代表。要針對個別說明主題提供意見反應,請使用個別主題頁面中的「提供對此主題的意見反應」連結。