隱藏目錄

Example - Mapping a Revision Number to a Drawing Title Block

In this example, a workflow updates drawing title blocks whenever a drawing is approved.

This example demonstrates the only method available for updating a file data card variable with the file revision number. You cannot update a file data card with a revision number using the Increment Revision command from the Explorer view.

This example is based on the default workflow and file data cards created when setting up a new vault.
  1. Create the revision number format as described in Creating Revision Numbers:
    1. Create a revision number component called AlphaRev with a format string of A,B,C,...,Z and an initial value of 1.
    2. Create a revision number format called Revision using the AlphaRev component.
  2. Set up the data card variable mapping (see Mapping to SOLIDWORKS Custom Properties):
    1. Open the SOLIDWORKS file data card.
    2. Add an edit box control with a variable called Revision.
    3. Edit the Revision variable to make sure the CustomProperty block has a Revision attribute mapped to SOLIDWORKS drawing files (.slddrw).
  3. Link the revision number to the workflow (see Creating Workflow Transitions and Creating Workflow States):
    1. Open Default Workflow.
    2. Open the Passed approval transition Properties dialog box.
    3. Add a new Set Variable action to assign the Revision variable to Next Revision (%nextrevision%).
    4. Add an Inc. Revision action.

      Ensure that the Inc. Revision action follows all Set Variable actions, otherwise the revision will be set on the previous version that is created when the variable is updated.

    5. Close the transition's Properties dialog box.
    6. Click the Approved state box.
    7. On the Revision Numbers tab, from the State revision number list, select Revision.
    8. Close the state's Properties dialog box and save the workflow.
  4. Set up the SOLIDWORKS drawing title block:
    1. Open a drawing file in SOLIDWORKS.
    2. Edit the sheet format to add a note linked to a custom property called Revision.
    3. Save the drawing to a local folder.
  5. Test the updating of the drawing title block:
    1. Drag the SOLIDWORKS drawing into a vault view folder and check in the file.
    2. Change state of the drawing until it passes the Passed Approval transition and ends up in the Approved state.

      The next revision should now be set on the drawing file and the Revision variable in the file data card should show the value.

    3. Open the drawing in SOLIDWORKS.

      The revision appears in the title block.



提供對此主題的意見反應

SOLIDWORKS 歡迎您提供有關於文件呈現方式、正確性、及完整性的意見反應。請使用下方的表格直接將您對此主題的意見與建議傳送給我們的文件團隊。文件團隊並無法回答關於技術支援的問題。按一下此處來獲得關於技術支援的資訊

* 必要的

 
*電子郵件:  
主旨:   說明主題的意見反應
頁面:   Example - Mapping a Revision Number to a Drawing Title Block
*意見:  
*   我承認已閱讀且僅此接受隱私權政策,Dassault Systèmes 將遵循此政策之規定使用我的個人資料

列印主題

選擇要列印的內容範圍:

x

偵測到您使用的瀏覽器版本是舊於 Internet Explorer 7。要獲得最佳的顯示,建議您升級瀏覽器到 Internet Explorer 7 或更新的版本。

 不要再次顯示此訊息
x

Web 式說明內容版本:SOLIDWORKS PDM 2014 SP05

要從 SOLIDWORKS 中停用 Web 式的說明並改用本機說明,請按一下說明 > 使用 SOLIDWORKS Web 式說明

要報告在 Web 式說明介面及搜尋中遇到的問題,請聯絡您當地的技術支援代表。要針對個別說明主題提供意見反應,請使用個別主題頁面中的「提供對此主題的意見反應」連結。