Hide Table of Contents

List Reaction Force

You can list reaction forces on selected entities for an active static, nonlinear, drop test and dynamic study. The software lists the X-, Y-, Z-components of the reaction force, and the resultant reaction force on the selected entities and on the entire model as well.

To list reaction forces, after running the analysis, right-click Results and select List Result Force. In the PropertyManager, under Options select Reaction force.

You can also click Results Advisor > List Result Force (Simulation CommandManager).

Reaction forces are not calculated for rigid bodies.

Selection

Plane, Axis or Coordinate System Lists the results relative to the selected entity.
Units Sets the output units.
Faces, Edges, or Vertices Lists the reaction forces for the selected entities.
part.png Components Lists the reaction forces for the selected components.
joint.png Joints Available for beams joints with applied fixtures. Lists the reaction forces at the selected beam joints.

Beam joints at the free end of beams highlight with bright green color.

Beam joints where two or more beams interesect highlight with orange color.
Time Step Available only with nonlinear, drop test and dynamic studies. Sets the time step number at which you want to list the reaction force.
  Available for nonlinear, drop test and modal time history studies. Displays the time corresponding to the selected plot step.
  Available for harmonic and random vibration studies. Displays the frequency corresponding to the selected plot step.
  Update Updates the results based on the current selected entities.

Reaction Force

Lists the X-, Y-, Z- components of the reaction force, and the resultant reaction force on the selected entities and on the entire model.

Response Graph time_curve.png Available only with nonlinear, drop test and dynamic studies. Creates 2D time history plots for the X-, Y-, Z- components of the reaction force, and the resultant reaction force on the selected entities and on the entire model.

Reaction Moment

Lists the X-, Y-, Z- components of the reaction moment, and the resultant reaction moment on the selected entities and on the entire model.

Response Graph time_curve.png Available only with nonlinear, drop test and dynamic studies. Creates 2D time history plots for the X-, Y-, Z- components of the reaction moment, and the resultant reaction moment on the selected entities and on the entire model.

Display Options

Display resultant forces Converts the three force vectors (X-, Y- and Z- components) to a resultant force vector. Only the resultant force vector is displayed.


Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   List Reaction Force
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:
x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2014 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.62