Circular Note Pattern PropertyManager You can display notes in a circular pattern in drawings. To display the Circular Note Pattern PropertyManager: In a drawing, click Circular Note Pattern (Annotations toolbar) or Insert > Annotations > Circular Note Pattern. General guidelines include:You can pre-select the notes to pattern. The default pattern center is the center of the drawing view. To change the pattern center, use Center X and Center Y. You cannot edit the note pattern after you create it, but you can edit any note individually. Parameters Reverse Direction Center X Sets the pattern center along the X axis. Center Y Sets the pattern center along the Y axis. Spacing Sets the number of total degrees included in the pattern. Equal spacing Patterns equidistant instances. Number of Instances Sets the number of pattern instances. Radius Sets the pattern radius. Arc Angle Sets an angle measured from the center of the selected entities to the pattern center. Notes to Pattern Notes to Pattern Select the notes to pattern. Parent topicCreating Note Patterns Related tasks Linear Note Pattern Circular Note Pattern Related reference Linear Note Pattern PropertyManager