Title block selector
|
Contextual menu of a book: Title
block > Replace
Contextual menu of a folder: Title
block > Replace
Contextual menu of a drawing: Title
block > Replace |
Each drawing type has an associated title block (electrical
project configuration). This command lets you change this default.
The title block associated with the drawing can be changed via the drawing
properties.
The title block selector allows you to select the new title block you
wish to associate with a drawing.
|
Properties: Opens
the Properties dialog box for
the selected title block. |
|
Preview: Opens the
title block in a preview dialog box. The block cannot be modified
in this view. |
|
List mode: Displays
a list of title blocks (name, description...). |
|
Thumbnail mode:
Displays title blocks as thumbnail previews. |
|
Configuration: Manages
the display settings for items in the dialog box. |
Classification
This tab displays the title blocks classification in tree form.
The left part of the dialog shows the title block classifications. The
right side shows the title blocks in the currently selected classification.
Display sub-class content: Check
this box, and all the title blocks in the sub-class of the selected classification
will be shown.
Filters
This tab lets you filter the title blocks list. All filter criteria
are taken from the title block properties.
The right part of the dialog box displays the title blocks that correspond
to the selected criteria.
Remove filter: Removes all filter
criteria.
|
If this needs to be applied to all electrical project drawings
or on a particular drawing type (Such as schematic or terminal
strip drawings), it is best to apply the new title block at the
electrical project configuration level. After changing the parameters
for one drawing, you will be asked if this new title block should
be applied to all drawings of the same type. |