This
dialog box lets
you
configure feature control frames
that
you can attach to entities in the drawing.
Standard
Displays
the name of the standard.
Revision
Displays the most recent revision of the standard the symbol complies
with.
Symbol Tab
Lets you configure the feature control frame symbol.
Requirements
Groups parameters for specifying the variations.
Option |
Description |
Insert
Symbol |
Inserts a special character at the
current cursor
position. |
Top
Notes |
Specifies the text to display
above the feature control
frame. In the drawing area, the notes and the feature
control frame move together as a single entity.
|
Geometric symbol |
Specifies the geometric
characteristic symbol for which you define the tolerance. The list of available symbols depends on the
current standard.
|
Tolerance 1 |
Specifies primary tolerance
data. You can click
Insert symbol
to insert special
characters
such as the diameter symbol or the maximum material condition
symbol.
|
Tolerance 2 |
Specifies secondary tolerance
data. Available
for ANSI standards only.
|
Datum |
Specifies the datum from which you
can measure the tolerance. |
Bottom
notes |
Specifies the text to display
under the feature control frame. In the drawing
area, the notes and the feature control frame move together as a
single entity.
|
Clear
Clears all the data and restores the default values.