You
can use this dialog box to configure datum
identifier
symbols.
To open the
Datum Identifier
dialog
box:
Do one of the following:
- On the ribbon, select .
- On the menu, click .
- Type AM_DatumIdentifier.
Symbol Tab
Datum on far side. Switches
between a solid or dashed leader line. A dashed leader line indicates the far side
surface.
Available
for
the
ISO
standard and other drafting standards that allow surface indicator leaders.
Requirements
| Insert
symbol |
Specifies
a special character to insert at the current
pointer
position. Available for
the
ISO
standard and other drafting standards that allow datum
notes.
|
| Identifier |
Specifies a label for the datum
identifier. The label must have
a
maximum
of
two characters and cannot include I, O,
or
Q.
|
| Datum
note |
Specifies reference datum targets
that correspond to one or more points on a surface. You can specify a series of datum targets
separated by commas.
Available for
the
ISO
standard and other drafting standards that allow datum
notes.
|
| Thread
note |
Specifies the diameter of a screw
or gear to use as the datum. Available for
the
ISO
standard
and other drafting standards that allow thread
notes.
|
Leader and Text Tab
Leader
| Arrowhead |
Specifies the
arrowhead
to use at the end of the leader
line. |
| Surface Arrowhead |
Specifies the type of
arrowhead to use at the end of the surface indication leader. Available
for
the
ISO
standard and other drafting standards that allow surface
indicator leaders.
|
| Edit entity attachment |
Attaches the datum identifier
symbol to an entity. |
Surface extension line
| Offset from entity |
Specifies the distance between
the extension line start point and the attached entity. |
| Extension beyond leader |
Specifies the distance between
the leader start point and the extension line start
point. |
Settings
Opens the Datum and Feature Identifier
Settings dialog box where you can specify the default settings for
the current drafting standard.