Recognizing an Edge Flange

First, recognize the edge flange on the part.

1. Click Recognize Features (Features toolbar) or Insert > FeatureWorks > Recognize Features.
2. Rotate the part to match the orientation in the image below.
3. In the PropertyManager:
   1. Under Recognition Mode, select Interactive.
   2. Under Feature Type, select Sheet metal features.
   3. Under Interactive Features, select Edge Flange in Feature type.
   4. Select the face shown.

      

      The face name appears in Selected entities.

   5. Click Recognize.
      The recognized feature disappears from the solid body. Any geometry not yet recognized still appears in the graphics area.
4. Do not close the PropertyManager.