Opening Assemblies Containing SpeedPak Subassemblies

When opening an assembly that contains subassemblies with existing SpeedPak configurations, you can specify to use the SpeedPak configuration instead of the last-saved configuration for some or all of the subassemblies.

Switching All Subassemblies to SpeedPak

When opening an assembly, you can use the SpeedPak configuration instead of the last-saved configuration for all subassemblies.

  1. Click Open (Standard toolbar) or File > Open.
  2. In the Open dialog box, select Use SpeedPak.
  3. Click Open.
    For subassemblies whose last-saved configuration is the parent of a SpeedPak configuration, the SpeedPak configuration is used.
    After an assembly is opened, you can switch subassemblies back and forth between a SpeedPak configuration and the SpeedPak's parent configuration. See Switching Between SpeedPak and Parent Subassemblies.

Switching Selected Subassemblies to SpeedPak

When opening an assembly, you can use a SpeedPak configuration or SpeedPak instance for selected subassemblies.

Use Selective Open to specify to use a SpeedPak configuration or SpeedPak instance for selected subassemblies. The subassemblies you select must have SpeedPak configurations or SpeedPak instances already.

To use SpeedPak for selected subassemblies:

  1. Click Open (Standard toolbar) or File > Open.
  2. In the Open dialog box:
    1. Browse to the assembly that you want to open.
    2. Under Mode, select Large Design Review.
    3. Click Open.
    In the FeatureManager design tree:
    • indicates a SpeedPak configuration.
    • indicates a subassembly whose last-saved configuration is the parent of a SpeedPak configuration.
    • indicates a SpeedPak instance.
  3. On the CommandManager, click Selective Open or Selective Open in Lightweight .

    Selective Open in Lightweight is available when Manually manage resolved and lightweight modes is selected in system options. To select this option, click Tools > Options > System Options > Performance.

  4. Do one of the following:
    • For , select the subassembly.
    • For , right-click the subassembly and select Use SpeedPak.
    • For , select the subassembly.
  5. Continue with selections as usual for Selective Open.
    The assembly loads the SpeedPak configurations or SpeedPak instances that you selected for subassemblies, plus other components that you specified to load.