Rotate entities by selecting a center of rotation and the number of degrees to rotate.
To open this PropertyManager:
Click Rotate Entities (Sketch toolbar) or .
Entities to Rotate
|
Sketch items or annotations |
|
|
Keep relations |
- Maintain relations between sketch entities.
- Clear to break relations between selected entities and those that are not selected.
|
Parameters
Sketch Type |
Parameters |
2D Sketch
3D Sketch On Plane
|
Center of Rotation
|
Moves the pointer to set a Base point .
|
Angle
|
Sets a value for the Angle.
|
To rotate the sketch entities, drag one of the handles on the Rotate Point Defined icon .
|
3D Sketch
|
If sketch entities were selected when you clicked Rotate, these items appear:
Rotation Reference
|
Specifies a line within the selected entities around which rotation occurs.
|
Rotation Reference Angle
|
Specifies the angle to rotate the selected entities around the rotation reference.
|
|
If no entities were selected:
Rotation Reference
|
Specifies a line within the selected entities around which rotation occurs.
|
Rotation Origin
|
Specifies the rotation origin point relative to the X, Y, and Z origin.
|
Rotation Angle
|
Specifies the rotation angle.
|
When you click Rotation Reference and then select a line, Rotation Reference Angle appears and Rotation Origin and Rotation Angle disappear.
To display Rotation Origin and Rotation Angle again, right-click Rotation Reference, and then select Clear Selections.
|