Hide Table of Contents

Weldment Cut List PropertyManager

Specify properties for weldment cut lists.

To open the Weldment Cut List PropertyManager:

  1. In a drawing, click Weldment Cut List Tool_Weldment_Cut_List_Table.gif (Table toolbar) or Insert > Tables > Weldment Cut List.
  2. Select a drawing view.

Table Template

Click Browse for template PM_Table_Browse_Template.gif to choose a standard or custom template. This option is available only during table insertion. The weldment cut list table templates supplied with the software add columns to the default format. They are located at: install_dir \lang\english. The standard template (cut list.sldwldtbt) creates ITEM NO., QTY., DESCRIPTION, and LENGTH columns.

Table Position

The stationary corner controls the direction in which the table expands when adding new columns or rows.

Set the Stationary corner to:

PM_Table_Anchor_TopLeft.gif Top Left New columns extend to the right and new rows extend below the anchor point.
PM_Table_Anchor_TopRight.gif Top Right New columns extend to the left and new rows extend below the anchor point.
PM_Table_Anchor_BottomLeft.gif Bottom Left New columns extend to the right and new rows extend above the anchor point.
PM_Table_Anchor_BottomRight.gif Bottom Right New columns extend to the left and new rows extend above the anchor point.

Attach to anchor point

Attaches the specified corner to the table anchor.

The Stationary corner option is not available when you first create the table. If the table is anchored on creation, the stationary corner is automatically selected on the drawing sheet in the quadrant nearest the table anchor.


Cut lists are usually based on the As Welded configuration.

Keep Missing Item

If cut list items have been deleted from the weldment since the cut list was created, you can keep the items listed in the table. If missing items are kept, select Strikeout to display text for the missing item with strikeout formatting.

Item Numbers

  Start The cut list starts with the number displayed.
Do not change item numbers Click for item numbers to remain with their rows when columns are sorted or re-ordered.


Box Border Sets a line thickness for the outside border of the table.
Grid Border Sets a line thickness for the inner grid lines of the table.


In drawings with named layers, select a layer. The table assumes the layer color.

Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

Subject:   Feedback on Help Topics
Page:   Weldment Cut List PropertyManager
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:


We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again

Web Help Content Version: SOLIDWORKS 2016 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.