You can use the Add Splice
PropertyManager to add and edit splices to electrical routes.
The PropertyManager appears when you drag a splice component
from the Design Library onto the split point. When you pin this PropertyManager and
select Without Component in Splice Options, you can assign properties to the
splice and add multiple splices with the same properties.
When you add splices to the route, the software adds a Splices
folder to the FeatureManager design tree.
You can delete splices without components from the FeatureManager design tree or from the graphics area
by deleting the splice junction point.
Splice Options
| With
component |
Adds splices with
components. |
| Without
Component |
Adds splices without components
and displays Additional
Properties. You can create and modify
properties. |
Splice Parameters
| Use Splice Library |
Select the type and the name of the splice defined in the
library. |
| Splice Reference
Name |
Enter a name for the splice. |
| Splice Component |
Displays the file path of the splice component. Browse to select another splice component. |
Additional Properties
| Name |
Enter a name for a new property. |
| Value |
Enter a value or text expression for a new
property. |
| Create/Edit |
Adds the new name and value to the Additional
Properties list. |
Splice Drawing Options
| Add Splice Connector table |
Adds a connector table for the splice drawing. |
| Add Splice Connector in BOM |
Adds splice to the BOM. This option also
appears in the Component Properties dialog box. The setting must
be consistent in both the PropertyManager and the dialog
box.
|