Core PropertyManager

To open the Core PropertyManager:

1. Create a core sketch on a tooling body (main core or cavity).
2. Click Core on the Mold Tools toolbar, or click Insert > Molds > Core.

Selections

	Bounding sketch for core	Displays the name of the selected core sketch.
	Extraction direction	Select an entity in the graphics area to define the extraction direction. The default direction is normal to the sketch plane. If necessary, click Reverse Direction to extract the core in the opposite direction. In the graphics area, the single-headed arrow indicates the extraction direction: Extraction direction Away from extraction direction
	Core/Cavity body	Displays the name of the tooling body from which the core is extracted.

Parameters

	Draft On/Off	Adds draft to the core. Set Draft Angle.
	Draft outward	Creates an outward draft angle. If cleared, an inward draft angle is created.
	End Condition	Select the end condition in the extraction direction. If you select Blind, then set Depth along extraction direction .
	End Condition	Select the end condition away from the extraction direction. If you select Blind, then set Depth away from extraction direction .
	Cap ends	Select to define the end surface of the core, if the core ends within the tooling body.