Polyline
|
Menu: Draw > Polyline |
Draws a succession of line segments or arcs to define a polyline. The
entire set of lines or arcs form one single entity. A polyline can have
a specified thickness. The second point of the first entity corresponds
to the first point of the second entity.
At the launch of the command, the dockable panel displays the available
options.
|
Ends the command. |
|
Undoes the last action. |
Keyboard inputs: Allows you
to enter X and Y coordinates separated by a comma (Example: 150,125),
a distance and an angle separate by "<" (Example: 150<45),
or relative coordinates from the previous point (Example: @10,150).
Line: Allows you to draw a line
segment based on the last point of the last entity drawn.
Arc: Allows you to draw an arc
based on the last point of the last entity drawn. Select the arc placement
Options at the bottom of the panel.
Width: Allows you to set a specific
thickness for the next entity. This thickness will be used on all of the
next entities.
Close: The last point of the
last entity corresponds to the first point of the first entity and creates
a closed area.
This entity type should not
be used to generate an electrical scheme. The graphical entities placed
with this command are not managed in the electrical project database.