Cloud
|
Menu: Draw > Cloud |
Draws a specific form that consists of sequential arcs. For example,
they are used to call attention on a graphical representation during a
revision step. Use multilingual texts to comment the revision cloud.
Three different forms can be used to represent the cloud; rectangular,
elliptical or freehand. These forms can be directly selected in the ribbon,
or in the dockable panel during the insertion.
|
Ends the command. |
|
Undoes the last action. |
Enter coordinates: Enter a value
for the X and Y coordinates. These two coordinates must be separated by
a comma (Example: 150,125).
Shape: Select the form you want
to use. The command options are different depending on the form you choose.
Radius:
Specify the radius of the sequential arc segments.
Specific options to the Rectangular mode
Dimension: Enter the values
corresponding to its length and height (Available only in Rectangular
mode).
Rotation: Enter the value corresponding
to the angle, in degrees (Available only in Rectangular
mode).
Specific options to the Elliptical mode
Distance: Enter the length of
the first and the second ellipse axes (Available only in Elliptical
mode).
Specific options to the freehand mode
Arc / Line: Select the entity
type you want to draw. The Arc
mode displays other placement option at the bottom of the dockable panel.
Width: Enter the line/arc width.
Close: Closes the form. The
endpoint has the same coordinates that the start point.
This entity type should not
be used to generate an electrical scheme. The graphical entities placed
with this command are not managed in the electrical project database.