# Damping Effects

If you apply initial conditions to a dynamic system, the system vibrates with decreasing amplitudes until it comes to rest. This phenomenon is called damping. Damping is a complex phenomenon that dissipates energy by many mechanisms like internal and external friction, thermal effects of cyclic elastic straining materials at the microscopic level, and air resistance.

It is difficult to describe dissipation mechanisms mathematically. Damping effects are usually represented by idealized mathematical formulations. For many cases, damping effects are adequately described by equivalent viscous dampers.

A viscous damper (or dashpot) generates a force that is proportional to velocity. A piston that can move freely inside a cylinder filled with a viscous fluid like oil is an example of a viscous damper. The damping force F_{d} is assumed to be linear with respect to the relative velocity at the two ends of the damper:

(Equation 1).

The constant c_{d}, which is the slope of the curve F_{d} versus the relative velocity is called the __coefficient of viscous damping__;

The units of coefficient of viscous damping are (force)/(velocity) or (force x time)/(length).

The response of a general viscously damped n-degree-of-freedom system is given by:

(Equation 2)

where:

[M] = n x n symmetric mass (or inertia) matrix

[C] = n x n symmetric damping matrix

[K] = n x n symmetric stiffness matrix

{f(t)} = n-dimensional force vector

{u}, , and are the displacement, velocity, and acceleration n-dimensional vectors, respectively.

In general, classical modal analysis does not necessarily lead to an independent system of equations of motion unless the damping matrix [c] resulting from the modal coordinate transformation can be treated as a diagonal matrix.

(Equation 3)

- Modal Damping
- Rayleigh Damping
- Composite Modal Damping
- Concentrated Dampers. Defined between two locations (available for modal time history analysis). See Spring-Damper Connector.

Contents

**Global Damping PropertyManager**

The Global Damping PropertyManager sets the options for constructing the global damping matrix.

**Modal Damping**

**Viscous Damping Ratios for Different Systems and Materials**

**Rayleigh Damping**

**Composite Modal Damping**

**Spring-Damper Connector**

**Parent topic**Dynamic Analysis