|
Cable properties:
Shown only if you select a wire/cable. Opens the electrical
project cable properties dialog box to edit the cable properties. |
|
Wire properties:
Opens the wire properties
dialog box to manage its marking and the technical data associated
with the wire. |
|
Equipotential properties:
Opens the Properties
dialog box for the wires common to this equipotential. Allows
you to manage the equipotential number and the technical data
associated with this equipotential. |
|
Edit wire mark:
Used to edit the number
(wire or equipotential) assigned to the wire. |
|
Align texts: Used
to align the wire mark texts. Select the texts to align and draw
an axis perpendicular to the wires. The texts will be aligned
to this axis. |
|
Show
/ hide equipotential labels: Displays or hides the equipotential label
symbol associated with the wire. This text is only visible in
the OnBoard version. |
|
Show / hide wire marks:
Used to display or hide the wire or equipotential numbers assigned
to the wire. This command can also be used on a multi-selection. |
|
Show
/ hide wire labels: Displays or hides the wire label symbol
associated with the wire. This text is only visible in the OnBoard version. |
|
Associate cable cores:
Used to create the cabling
of the wire. |
|
Dissociate cable core:
Dissociates the cable core associated to the selected wire. |
|
Wire Cabling order:
Used to manage the cabling order
for the wire. |
|
Create / delete bridges:
Allows you to create a bridge between two or more components (or
terminals). When you run this command, select the wires representing
a bridge and validate. The wires will automatically take up the
graphic characteristics defined in the electrical project configuration.
This command also lets you delete a bridge. Select the wires in
the graphic interface, shown as bridges, and use the Delete
bridges option. |
|
Edit connection path: Allows
you to define manually the nodal indicators representation
based on the wiring order. |
|
Show / hide cable cores
texts: Used to display or hide the texts relating to the
cable core when the wire is cabled. |
|
Add / remove from harness: Allows
3D harness
wires to be added or removed. In the dockable panel, select Add
or remove option and confirm the choice. In Harness
management, select the harness mark. |
|
Move: Used to move
the selected wire or wires. |
|
Cut:
Identical to the Copy command, the selected wires are then removed. |
|
Copy: Used to place
the selected wire(s) in the SOLIDWORKS Electrical
clipboard. |
|
Copy with insertion point:
Copies the symbol to the SOLIDWORKS Electrical
Clipboard and defines the insertion point. |
|
Hyperlink: Creates/Edits
a link to an external document. |
|
Delete: Deletes
the selected wire(s). |