Create eDrawings part (*.eprt), assembly (*.easm), and drawing (*.edrw) files from Pro/ENGINEER part, assembly, and drawing files.
Geometric Limited developed and distributes the eDrawings Publisher for
Pro/ENGINEER.
eDrawings for Pro/Engineer is a plug-in for Pro/Engineer that allows users to publish, share, and collaborate accurate representations of 2D and 3D product design data from Pro/Engineer files as read-only eDrawings files.
You can also open Pro/ENGINEER models (parts and assemblies) in eDrawings.
Installation
- Download the eDrawings Publisher for Pro/ENGINEER from https://edrawings.geometricglobal.com/products/edrawings-for-proengineer-and-creo/.
- Double-click the downloaded executable file and follow the instructions to install the eDrawings Publisher for Pro/ENGINEER.
The eDrawings Publisher for Pro/ENGINEER appears as the
eDrawings menu in the Pro/ENGINEER application.
- The installer detects and installs on all supported versions of Pro/ENGINEER.
- Enter your eDrawings Professional license key, if you have one, to install
eDrawings Professional for Pro/ENGINEER. If you do not enter the
license key, you will get the complimentary eDrawings Publisher
for Pro/ENGINEER.
To create eDrawings files using the eDrawings Publisher for Pro/ENGINEER:
- Open the Pro/ENGINEER file.
- Click eDrawings and select one of the following:
Publish
|
Opens the eDrawings Viewer with the eDrawings file displayed. The file currently open in Pro/ENGINEER is exported using the options set in the Options dialog box (see Options below).
|
Options
|
Displays the Options dialog box. - Select from these options which vary depending on the file type:
Export shaded data with drawings
|
(Drawings only.) Saves the shaded data from the drawing document in the published eDrawings file.
|
Export hidden components with assemblies
|
(Assemblies only.) Exports hidden components in a Pro/ENGINEER assembly file in the eDrawings file with the visibility set to hidden.
|
Tessellation Quality
|
Controls the amount of tessellation. Lower settings have smaller file size but are less accurate, while higher settings are more accurate but have larger file size.
|
Alert on free publishing
|
Enables a pop-up dialog that appears if you publish an eDrawings file but do not
have an eDrawings Professional license from the
pool of available network licenses.
|
Export mass properties
|
(Parts and assemblies only.) Allows the mass properties of the entire model to be exported.
|
Export simplified representations/family table
|
(Parts and assemblies only.) Exports simplified representations and family table instances in the published eDrawings file.
|
Export BOM table
|
Exports bill of material information from a Pro/ENGINEER assembly in the eDrawings file.
|
Export multiple drawings sheets
|
Exports multiple drawings sheets in the eDrawings file.
|
Allow recipient to measure
|
Enables measurement of this model by other eDrawings Professional users. If the
file is review-enabled, then anyone can measure
it. If you do not enable this option, measurement
is disabled and no one can measure the model.
|
Allow recipient to export STL
|
(Parts and assemblies only). Allows recipients of the eDrawings file to save it as an STL file from the eDrawings Viewer.
|
- Click OK to save the options, or Reset to set the options to the original settings.
|
Save
|
Displays the eDrawings Save dialog box. - Set the Options (see the Options section above).
- To protect the eDrawings file with a password, select Password required to open the document, then enter and confirm the password.
- Enter the file name.
- Click OK to save the eDrawings file.
You can then view the eDrawings file using the eDrawings Viewer.
|
Batch Publish
|
Converts multiple CAD files to eDrawings files. Displays the Batch Publisher dialog box. - Select the files to publish. You can also select folders.
- Specify the location for saving the eDrawings files.
- Set export Options.
- Click Start.
|
Help
|
Displays the eDrawings online help.
|
About
|
Displays information about the eDrawings for Pro/ENGINEER application, including the version.
|