SpeedPak Instances

You can create a SpeedPak instance from a subassembly without modifying the referenced subassembly. The SpeedPak instance is saved in the top-level assembly.

You can edit a SpeedPak instance by right-clicking the instance and clicking SpeedPak Options > Edit SpeedPak.

Inserting a SpeedPak Instance

You can create a SpeedPak instance by adding an assembly to the model.

To insert a SpeedPak instance:

  1. Open a model and click Insert > Component > Insert SpeedPak Instance .
    Insert SpeedPak Instance is not available in Large Design Review mode.
  2. In the PropertyManager, select an assembly to insert and specify options.
  3. Click Next to open the SpeedPak PropertyManager and specify SpeedPak options.
    The SpeedPak instance shows in the FeatureManager® design tree.

Creating a SpeedPak Instance

You can create a SpeedPak instance from a subassembly that is in the model.

To create a SpeedPak instance:

  1. Open a model that has subassemblies.
  2. Right-click a subassembly and click SpeedPak Options.
  3. Select an option: Create Mated SpeedPak or Create Graphics SpeedPak.
  4. When prompted, select Create a SpeedPak Instance in the top level assembly.
    The SpeedPak instance appears in the FeatureManager design tree.

Switching Between a SpeedPak Instance and a Parent Subassembly

To switch between a SpeedPak instance and a parent subassembly:

  1. In the FeatureManager design tree, right-click the SpeedPak instance and click SpeedPak Options > Set SpeedPak to Parent.
  2. Optional: To switch back to the SpeedPak instance, right-click the subassembly and click SpeedPak Options > Use SpeedPak.