Completing the Layout Sketch Press Ctrl, select the edges shown, then click Convert Entities on the Sketch toolbar to convert the selected model edges into sketch entities. The indicated edges are each composed of two separate arcs; both arcs must be selected for entity conversion. Click Extend Entities on the Sketch toolbar, then click the converted edges. Each vertical line is extended to meet the offset horizontal line. Sketch a horizontal line to connect the two converted edges across the top. Sketch two vertical lines, then dimension them as shown. Click View > Hide/Show > Sketch Relations to hide the display of sketch relations in the graphics area when too many relations cover the sketch geometry. Parent topicAdvanced Design Techniques Previous topic Creating the Layout Sketch Next topic Adding Equations to the Layout Sketch
