Creating the Assembly

Create the assembly using the shortcut menu.

  1. Click Window and select MouseSplit.SLDPRT.
  2. In the FeatureManager design tree, right-click Split1 and select Create Assembly.
  3. In the PropertyManager, click Browse and save the assembly in the Split folder as AssemblySplit.SLDASM.
    The full path to the assembly appears for Assembly file.
  4. Click .
    Click Rebuild and save the document if prompted.
    Because the buttons were split off together from the master part, you need to replace the Buttons component with the separate buttons.
  5. In AssemblySplit.SLDASM, delete the Buttons part from the assembly.
  6. Click Insert Components (Assembly tab) to insert the existing button components.
  7. In the PropertyManager, click Browse, select LeftButton.SLDPRT, click Open, then .
  8. Repeat steps 6 and 7 for the RightButton.SLDPRT.
  9. Click File > Save to This PC.
    In the Save Modified Documents dialog box, click Save All.
  10. Optional: Click Rebuild so the model rebuilds and appears as shown above.