Creating Cut List Items

You can display a cut list on the drawing sheet.

The cut list:
  • Groups identical items, such as the four gussets or the two I-beam members
  • Isolates items that do not belong on a cut list, such as the eight fillet beads
  1. Click Window, and select the part document window.
  2. In the FeatureManager design tree, expand Cut list(31).
  3. If the Cut list(31) icon is , right-click the cut list and select Update.
    The cut list icon indicates that the cut list is updated and identical items are grouped together in structural member and Cut-List-Item folders.
  4. Under Cut List(31) , select each folder to highlight its entities in the graphics area.
    Option Description
    Cut-List-Item3(8) Sub-folder with Sub-weldment1(8) created earlier
    TUBE, SQUARE 30 X 30 X 2.60<1>(4) Four mitered members of the front frame
    TUBE, RECTANGULAR 50 X 30 X 2.60<1>(1) One rectangular cross member
    TUBE, SQUARE 30 X 30 X 2.60<2>(4) Four side segments of the box
    Cut-List-Item2(4) Four gussets
    SB BEAM 80 X 6<2>(2) Two I-beam segments
    Fillet Bead1[1] through Fillet Bead4[2] are listed separately.
  5. Click File > Save to This PC.