Copying and Pasting with Anchor Points When copying a set of objects in a drawing, you can define an anchor or reference point and use that reference point to paste the objects into a new drawing. To copy and paste with anchor points: Do one of the following: On the Edit tab, select Copy with insertion point . In the graphics area, right-click and click Copy with insertion point . Press Ctrl + Shift + C. Select the objects to copy. To enter a reference point, do one of the following: Click a location in the graphics area to be the reference point. This sets the X and Y coordinates and closes the dialog box. In Enter Coordinates, type the X and Y coordinates and click . On the Command tab, click . Open a drawing where you want to paste the contents. Do one of the following: On the Edit tab, click Paste . Right-click in the graphics area and click Paste . Press Ctrl + V. Position the pointer where you want to insert the content and click.The content is inserted away from the pointer at the distance specified by the reference point. Parent topicSOLIDWORKS Electrical Related concepts Automatically Update Project Level Reports Mark Wires with the Same Value as I/O Address Connected Other Enhancements for SOLIDWORKS Electrical Properties Panel Graphical Enhancement Related tasks Associating a Data File Shortcut to a Project Associating External SOLIDWORKS Assemblies Creating Links in Design Rule Check Reports Changing Attribute Visibility Creating Cable Mark Formulas Importing and Exporting Drawings with Microsoft Excel