You can create 3D connectors and connector blocks simultaneously when you
create flattened route drawings for route assemblies.
When you flatten a route from the Flatten
Route PropertyManager, in Flatten
Options, you can select Display 3D
connectors or Use drawing connector
blocks. The software creates 3D connectors and connector blocks for
flattened route drawings. You can select one or both types.
Connectors
| 3D
Connectors |
Visible in the drawing view if you select Display 3D connectors when you
flatten the route. |
| Connector
Blocks |
Visible in the drawing view if you select Use drawing connector blocks when
you flatten the route. |
| Pin
Text |
Enabled if you provide pin text when you define
connector blocks. |
| Pin
Color |
Enabled if you provide a pin color when you define
connector blocks. |
Annotations
| Component
Reference |
Displays the connector name and reference in the
drawing view. When you select Display 3D
connectors, the connector and component name are
highlighted when you click the connector table. When you select
Use drawing connector
blocks, the connector name is highlighted when you
click the connector table in the drawing view. |
Accessory Components
- Splices
- Inline Components