# Damping Effects

If you apply initial conditions to a dynamic system, the system vibrates with decreasing amplitudes until it comes to rest. This phenomenon is called damping. Damping is a complex phenomenon that dissipates energy by many mechanisms like internal and external friction, thermal effects of cyclic elastic straining materials at the microscopic level, and air resistance.

It is difficult to describe dissipation mechanisms mathematically. Damping effects are usually represented by idealized mathematical formulations. For many cases, damping effects are adequately described by equivalent viscous dampers.

A viscous damper (or dashpot) generates a force that is proportional to velocity. A piston that can move freely inside a cylinder filled with a viscous fluid like oil is an example of a viscous damper. The damping force Fd is assumed to be linear with respect to the relative velocity at the two ends of the damper:

(Equation 1).

The constant cd, which is the slope of the curve Fd versus the relative velocity is called the coefficient of viscous damping;

The units of coefficient of viscous damping are (force)/(velocity) or (force x time)/(length).

The response of a general viscously damped n-degree-of-freedom system is given by:

(Equation 2), where:

[M] = n x n symmetric mass (or inertia) matrix

[C] = n x n symmetric damping matrix

[K] = n x n symmetric stiffness matrix

{f(t)} = n-dimensional force vector

, , are the displacement, velocity, and acceleration n-dimensional vectors, respectively.

In general, classical modal analysis does not necessarily lead to an independent system of equations of motion unless the damping matrix [c] resulting from the modal coordinate transformation can be treated as a diagonal matrix.

(Equation 3)

The following types of damping are available:

### Related Topics

Modal Time History Analysis

Harmonic Analysis

Random Vibration Analysis

Provide feedback on this topic

* Required

 *Email: Subject: Feedback on Help Topics Page: Damping Effects *Comment: * I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:

x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

Never show this message again
x

Web Help Content Version: SOLIDWORKS 2012 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.