The following elements are required to create a circular duct elbow for using in a duct route assembly. Please note that the feature names and dimension names except BendRadius@ElbowArc and BendAngle@ElbowArc may change as per your design requirements.
Round Duct Elbow Sketch
- Route: A sketch on the Top plane named Route with a dimension named Diameter@Route.
 |
| Diameter@Route = 1 |
- ElbowArc: A sketch on the Front-Right plane named ElbowArc with dimensions:
- BendAngle@ElbowArc (mandatory dimension)
- BendRadius@ElbowArc (mandatory dimension)
 |
BendAngle@ElbowArc = 90°
BendRadius@ElbowArc = 1.5
|
- Sketch3: Two connection point properties on the Front-Right plane with names and dimensions:
- CPoint1
- Diameter@CPoint1
- StubLength@CPoint1
- CPoint2
- Diameter@CPoint2
- StubLength@CPoint2
 |
| Sketch3: CPoint1 and CPoint2 |
Sweep
A sweep feature on the Top plane named
Sweep-Thin1 with dimension named
Thickness@Sweep-Thin1.
 |
 |
| Sweep-Thin1 |