The following elements are required to create a circular duct end for using in a duct route assembly. Please note that the feature names and dimension names may change as per your design requirements.
Duct End Sketch
- Sketch 1: A sketch on the Front plane named Sketch1 with a dimension named Diameter@Sketch1.
 |
| Diameter@Sketch1 = 1 |
- Sketch 2: A sketch on the Front plane named Sketch2 with a dimension named FlangeHeight@Sketch2.
 |
| FlangeHeight@Sketch2 = 0.2 |
- Sketch 3: A connection point property on the Front plane called CPoint1 with dimensions named:
- StubLength@CPoint1
- Diameter@CPoint1
 |
| Sketch3: CPoint1 |
Extrusion
- Extrude-Thin1: An extruded base feature named Extrude-Thin1 extruded in the direction of the positive Z-axis with dimensions:
- Length@Extrude-Thin1
- Thickness@Extrude-Thin1
 |
Length@Extrude-Thin1 = 0.25
Thickness@Extrude-Thin1 = 0.002
|
- Boss-Extrude2: An extruded boss feature named Boss-Extrude2.
 |
| Boss-Extrude2 = 0.2 |
Mate References
Extrude-Thin1 mated with the inner diameter of Boss-Extrude2.