| Command |
Description |
Ribbon |
| AM_AddRevision |
Adds revisions to a revision table |
Mechanical Annotate > Revision Table |
| AM_AddRevisionSymbol |
Inserts one or more symbols that link to a revision in a revision table |
Mechanical Annotate > Revision Table |
| AM_Balloon_Reorg |
Lets you reorganize the arrangement of existing balloon callouts in the graphics area |
Mechanical Annotate > Balloon > Reorganize |
| AM_BOM |
Creates Bills of Materials (BOMs) in the drawing after inserting part references into the graphics area (a BOM shows data for the blocks associated with part references) |
Mechanical Annotate > BOM |
| AM_BOM_Settings |
Lets you configure component properties |
Mechanical Annotate > BOM |
| AM_ConstLine |
Draws infinite construction lines on the Mechanical construction line layer |
Home > Construction Lines |
| AM_ConstructionlineLayer |
Locks or unlocks Mechanical construction line layers |
Home > Layers |
| AM_Detail |
Creates detail views from a specified area of a drawing |
Mechanical Content > Details > Detail View |
| AM_DetailEdit |
Displays the Edit Detail dialog box |
Mechanical Content > Details > Detail View |
| AM_EditFrame |
Edits drawing frames and title blocks in both Model and Sheet modes |
Mechanical Annotate > Frame |
| AM_EditHardware |
Displays the current values for a specified hardware and allows editing hardware properties |
Mechanical Content > Hardware |
| AM_EditHole |
Displays the current values for a specified holes and allows editing hole properties |
Mechanical Content > Holes |
| AM_EditHoleTable |
From a hole table, repositions holes by changing their coordinates, recreates it, or deletes it |
Mechanical Content > Holes |
| AM_EditPartsList |
Edits revisions in the active revision table and reorganizes, reindexes, or deletes a revision table |
— |
| AM_EditRevisionTable |
Edits revisions in the active revision table and reorganizes, reindexes, or deletes a revision table |
Mechanical Annotate > Revision Table |
| AM_EditScrewConnection |
Displays the current values for a specified screw connection and allows editing screw connection properties |
Mechanical Content > Screw Connections |
| AM_EntitySnap1, AM_EntitySnap2, AM_EntitySnap3, AM_EntitySnap4 |
Activates the Mechanical Snap Configuration settings for EntitySnaps, EntityTracks, Snaps, and Polar Guides (Settings1 to Settings4) |
— |
| AM_FeatureControlFrame |
Creates a feature control frame |
— |
| AM_Frame |
Adds frames and title blocks to the drawing in Model mode, as well as in Sheet mode |
Mechanical Annotate > Frame |
| AM_Hardware |
Inserts hardware components into drawings |
Mechanical Content > Hardware |
| AM_HoleCallout |
Inserts hole callouts to annotate Mechanical holes in drawings with dimensions and descriptions |
Mechanical Content > Holes |
| AM_HoleFeat |
Inserts 2D representations of holes to drawings based on national standards or custom standards |
Mechanical Content > Holes |
| AM_HoleTable |
Inserts an associative chart of locations for selected holes |
Mechanical Content > Holes |
| AM_InsertBalloon |
Creates and inserts balloon callouts in the graphics area |
Mechanical Annotate > Balloon |
| AM_Layer |
Displays the Mechanical Layer Manager to manage layers and Mechanical layer definitions (dialog box variant) |
Home > Layers |
| -AM_Layer |
Manages layers and Mechanical layer definitions (command window variant) |
— |
| AM_Layergroup |
Displays the Layergroup Manager to manage layergroups and layer properties (dialog box variant) |
Home > Layers |
| -AM_Layergroup |
Manages layergroups and layer properties (command window variant) |
— |
| AM_LayVisEnh |
Use the AM_LayVisEnh command to determine how entities on inactive layergroups appear in the graphics area |
— |
| AM_MechanicalSnap |
Manages and controls Mechanical Snap Configurations in the Snaps category of the Mechanical - Settings dialog box |
— |
| AM_New |
Creates a new drawing with a specified frame and title block |
— |
| AM_PartReference |
Creates a Part Reference and places it in the graphics area |
Mechanical Annotate > BOM |
| AM_PartReferenceBlock |
Creates a Part Reference in the graphics area and attaches it to a Block |
Mechanical Annotate > BOM |
| AM_PartReferenceEdit |
Edits BOM-related information for the part that is associated with a specified Part Reference |
Mechanical Annotate > BOM |
| AM_PartList |
Creates a Parts List |
Mechanical Annotate > BOM |
| AM_PartListEdit |
Lets you modify existing parts lists |
Mechanical Annotate > BOM |
| AM_PHatch |
Quickly applies predefined hatches |
Home > Draw |
| AM_RectangleAndDimensions |
Draws a rectangle with dimensions |
Home > Draw |
| AM_RevisionTable |
Inserts a revision table in the graphics area |
Mechanical Annotate > Revision Table |
| AM_ScaleXY |
Enlarges or reduces entities, applying individual X and Y scaling factors if necessary |
Modify |
| AM_ScrewConnection |
Inserts a screw connection combining a screw or bolt, nuts, and washers into a single block |
Mechanical Content > Screw Connections |
| AM_SectionLine |
Draws section lines to indicate where the cutting plane cuts the model |
Mechanical Content > Details > Section Line |
| AM_SectionLineEdit |
Lets you modify section line properties |
Mechanical Content > Details > Section Line |
| AM_Settings |
Determines the basic settings for Mechanical features |
Mechanical Content > Manage |
| AM_SFin |
Inserts surface finish symbols to specify surface textures for manufacturing |
Mechanical Annotate > Symbols |
| AM_SFinFlip |
Rotates a surface finish symbol 180 degree |
Mechanical Annotate > Symbols |
| AM_Standards |
Activates a standard for the current drawing and to create, edit, import, and export standards |
Mechanical Content > Manage |
| AM_Weld |
Adds welding symbols to describe the type of welds, their sizes, and other processing and finishing information |
Mechanical Annotate > Symbols |